MIDCOM Data Technologies Label Printer Skipping Labels

https://midcomdata.com/zebra-printer-skipping-labels/

To do so follow these 5 quick steps:

1.Load your Zebra printer with labels for your application.

2.Power on your Zebra printer.

3.Press and hold the Feed Button until it flashes two times, and then release it.

4.Allow your Zebra printer to complete feeding labels and printing a sensor profile.

5.Your Zebra printer should now be calibrated. To test – press the feed key and one label should be issued each time.

Once complete, then you check the Media settings. Confirm that the Media Loading is set so that the media is aligned correctly, and that the printer is set to the correct Media Type.

Following these easy steps will help to ensure that your labels and your Zebra printers are working as a team in tandem printing on each and every label, every time.

For further tips and information on issues you are having with Zebra printers skipping labels or any other operation or maintenance issues, call us as (248) 397-9574 and immediately talk to one of our friendly representatives or visit our Zebra printer repair page.